A powerful Black Swan 6010 Liquid Boiler Cleaner Plus Inhibitor NON Petroleum Quart 32 Fl Oz is designed and ideal for to clean all hot water systems. This new product is recommended for all cooling systems. Removes scale, rust, grease, dirt, oil, sludge. Prevents clogging of automatic hot water valves. Removes impurities and thus water becomes clear. Black Swan LIQUID BOILER CLEANER will deposit a non-insulating film within the entire boiler system, thus corrosion is reduced to the minimum. Safety factor is increased. LIQUID BOILER CLEANER contains an inhibitor which will prevent rust and corrosion. It also stops priming and surging. LIQUID BOILER CLEANER is safe and easy to use. No need to drain or flush the system unless there are unusually dirty conditions. By using LIQUID BOILER CLEANER you will save energy and promote maximum boiler efficiency. Model# 06010 Features: Removes impurities and sludge from boiler Can be used for all automatic cooling systems Ideal for steam boilers Guaranteed to stop surge within 10 minutes.

Black Swan Liquid Boiler Cleaner Plus Inhibitor is a powerful liquid designed to clean hot water systems. Removes scale, rust, grease, dirt and oil. Liquid Boiler Cleaner contains an inhibitor which will prevent rust and corrosion. It also stops priming and surging.

Liquid Boiler Cleaner is safe and easy to use. No need to drain or flush the system unless there are unusually dirty conditions. By using Liquid Boiler Cleaner you will save energy and promote maximum boiler efficiency.

For Moderately Dirty Systems:

• Pour Liquid Boiler Cleaner into boiler through safety valve or any other convenient opening.
• To determine quantity of product to introduce into system, see chart below.
• Under normal circumstances no draining or flushing of the system is necessary.

For Oily, Surging or Rusty Systems:

• Pour Liquid Boiler Cleaner into system per instructions and allow to remain in boiler for two weeks.
• Allow water to cool and drain boiler.
• Clean all parts of system thoroughly.
• Fill the boiler with clean water and add a second dose of Black Swan Liquid Boiler Cleaner to system.
• No draining or flushing of system is necessary.
• For best results clean boiler once a year.

NOTE:
For every 500 sq. ft. above 2100 sq. ft. add 2 quarts for cleaning and treating. The above amounts are based upon one quart treating 40 gallons of boiler water. For boilers having smaller water capacity use proportionately.